Belling FSE60DO Service Manual download pdf (Page 4)

Thank you for choosing a British

built appliance by Belling.

We hope that the following

information will help you to quickly

familiarise yourself with the features

of the appliance, and to use it

successfully and safely.

Our policy is one of constant

development and improvement. Strict

accuracy of illustrations and specifications

is not guaranteed. Modification to

design and materials may be necessary

subsequent to publication.

This cooker may be sited with cabinets

on both sides, or it may be free

standing. Sufficient space should be

allowed at either side of the cooker to

enable it to be pulled out for cleaning

and servicing.

Please read the instructions in this

handbook before using or installing

this appliance. All installation and

servicing work must be carried out by

a competent person.

Your 1st Year Guarantee

To fulfil the conditions of your guarantee,

this appliance must be correctly

installed and operated, in accordance

with these instructions, and only be

used for normal domestic purposes.

Please note that the guarantee, and

Service availability, are only available

in the UK and Republic of Ireland.

Moving the cooker

Do not attempt to move the cooker by

pulling on the doors or handles. Open

the oven or grill door and grasp the

frame of the cooker, taking care that

the door does not shut on your fingers.

Take care to avoid damage to soft or

uneven floor coverings when moving

the appliance. Some cushioned vinyl

floor coverings may not be designed

to withstand sliding appliances without

marking or damage.

Before using the appliance for the

first time, remove any protective polythene

film and wash the oven shelves and shelf

runners in hot soapy water to remove

their protective coating of oil. Even so,

when you first turn on the oven or grill

you may notice a smell and some smoke.

Glass door panels

To meet the relevant Standards of

Domestic cooking appliances, all the

glass panels on this appliance are

toughened to meet the fragmentation

requirements of BS3193. This ensures

that, in the unlikely event that a panel

breaks, it does so into small fragments

to minimise the risk of injury.

Please take care when handling, using

or cleaning all glass panels, as any

damage to the surfaces or edges may

result in the glass breaking without

warming or apparent cause at a later

date. Should any glass panel be dam-

ages, we strongly recommend that is is

replaced immediately.

2

INTRODUCTION

1 2 3 4 5 6 7 8 9 ... 31 32

Comments to this Manuals

No comments