Belling IH6013 Service Manual

BellingIH6013Part No 082759403 Date 19/03/2013Users Guide & InstallationHandbook

USING THE HOBCentral On/Off switchThe central on/off switch enables all of the cooking zones to be switched off simultaneously at a touch of a key.To

USING THE HOBPan Detection As soon as you lift the pan off the zone the power is automatically reduced, help-ing to save energy.The above “U” symbol a

USING THE HOBInduction Cook ZoneSmallest Recom-mended Diameter (mm)LHF 150LHR 120RHR 150RHF 120Cookware made of enamelled steel or with aluminium or c

USING THE HOBTROUBLESHOOTINGThe hob produces a smell the rst few times it is usedHeat a pan full of water on each zone for half an hour.Pans make a n

USING THE HOBAppliance Errors Fault Description ActionF0 Software Error Switch the power off and on, system should reset FA Safety key Error Switch th

USING THE HOB (13 AMP VERSIONS)13 AMP OPERATIONYour hob has been designed to allow you to connect to a 13Amp fused spur and is suitable for a variety

CLEANINGELECTRIC HOBCeramic glass hobs• The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper. Do not use a used dishcloth o

installationGeneral informationInstallation should only be carried out by aqualiedinstallerorengineer.Please keep to the following points most ca

installationCHOOSING YOUR INSTALLATIONMake sure that the air inlets through theventilator grids underneath the hob arenever blocked.We recommend that

installationClearances and dimension – require-mentsNo shelf or overhang of combustiblematerial should be closer than 650mmabove the hob.There must be

CONTENTS & INTRODUCTIONCONTENTS• SAFETY• USING THE PRODUCT • CLEANING• INSTALLATION INSTRUCTIONS • TECHNICAL DATA• CUSTOMER CAREINTRODUCTION

installationFitting into worktopCut a hole in the work surface to therequired size.A clearance of at least 50mm should bemaintained between the cutout

installationFixing Bracket AdviceDealing with sides, cross-rails andback-panels in the cabinetry.Depending on the cabinets, the worktopthickness and t

installationConnect to the electricity supply(For Fixed Wiring only)WARNING: This appliance must be earthed. Only connect to the electrical mains term

installation For products congured for a 13Amp fused spur & supplied with mains cable attached.This appliance must be connected by acompetentper

TECHNICAL DATASUPPLY: 220 -240V ~ 50Hz 2.8kWIndividual Cook Zone Power RatingsCook Zone Normal / Boost Power Rating kWLHF 1.5 / 2.0LHR 1.2 / 1.6RHR

CUSTOMER CARE15.030CUSTOMER CARE WEB SHOPHaving purchased a superior cooker, hob or hood from us, you’ll naturally want to keep it looking great. And

Please keep this handbook for future reference, or for anyone elsewho may use the appliance.

Please keep this handbook for future reference, or for anyone elsewho may use the appliance.

17.010CUSTOMER CARETo contact Belling about your appliance, please callWarranty Registration0844 481 0182to register your applianceCustomer Care Helpl

Safety 5.162BEFORE USING THE PRODUCTMake sure that you have removed all packaging and wrapping. Some of the items inside this appli

Safety 5.162during use, as this will seriously affect the safety and performance, particularly in relation to surface temperatures b

Safety 5.162electrical switch.Contact your local gas supplier immediately.ELECTRIC INDUCTION HOBWARNING:- Unattended cooking on a ho

Safety 5.162fail-safe.The pacemaker must be designed in compliance with the appropriate regulations.Caution: This appliance is for c

Safety 5.162the hob when you’re not around - take them off the cook zone if you have to leave the kitchen even if you think it will

Safety 5.162distracted or leave things unattended, so remember:If you’re called away from the cooker - by the phone or someone at th

USING THE HOB - INDUCTIONBefore using your hobIt is recommended that you clean and wash the hob surface before using for the rsttime.Applyathinc